普通磨料堆积密度测定仪,堆积密度测试仪,适用于检测制造固结磨具和涂附磨具的粗颗粒普通磨料的堆积密度
  • 欢迎光临宁波千赢国际登陆伟业仪器有限公司官网!
  • FT-106普通磨料堆积密度测定仪

    发布时间: 2019-08-28 10:45:43 点击: 228
    FT-106普通磨料堆积密度测定仪

    FT-106普通磨料堆积密度测定仪

    FT-106 Common abrasive bulk density tester

    一.      参照标准standard

    ISO9136:1989《粗磨粒  堆积密度的测定》和行业标准JB/T7984.2-1999《普通磨料  粗磨粒堆积密度的测定》的相关要求;GB/T20316.1-2009堆积密度测定仪要求;适用于检测制造固结磨具和涂附磨具的粗颗粒普通磨料的堆积密度

    According to the international standard ISO9136:1989 "the determination of coarse grinding grain bulk density” and industry standards JB/T7984.2-1999 the relevant technical requirements of  ordinary abrasive coarse grinding grain of bulk density determination, at the same time meet the requirements of GB/T20316.1-2009 bulk density meter;It is suitable to test the packing density of coarse grain grinding materials, which can be used in the manufacture of consolidation grinding tools and coated abrasive tools.

    二.参数资料Technical Parameters

    1.1漏斗材质:不锈钢;

     Funnel material: stainless steel.

    1.2漏斗尺寸:高度240mm;顶部直径160mm;出口直径:(20±0.5)mm;

    漏斗底部与测量筒上口的距离:(76±1)mm 测量筒尺寸:内径64mm; 净高度62mm  测量筒容积:.(200±0.5) cm3  测量误差:≤±0.02g/cm3

    Funnel dimensions: height 240mm, top diameter 160mm, outlet diameter: (20±0.5)mm, the distance between the bottom of the funnel and the top of the measuring cylinder: (76±1)mm, measuring cylinder dimensions: inner diameter 64mm, net height: 62mm, measuring cylinder volume: (200±0.5) cm3, measurement error:≤±0.02g/cm3.
    2.1测量误差:≤±0.02g/cm3。Measurement error:≤±0.02g/cm3.
    2.2测量筒容积:200±0.5cm3。Measuring cylinder volume: (200±0.5) cm3.
    2.3外形尺寸:230mm(长)×250mm(宽)×425mm(高)

    Dimensions: 230mm (L) * 250mm (W) * 425mm (H)